LED beacon yellow 12-24V magnetic socket

This LED beacon is equipped with a magnetic base allowing it to be positioned as needed on the vehicle’s roof. The spiral cable with connector can be used to connect the warning beacon to the on-board socket / cigarette lighter (SAE J563) in a matter of minutes without the need for cabling.

The light can be operated with an operating voltage of 12-24 V DC. It conforms to ECE R65 and ECE R10 and is extremely long-lasting thanks to the use of LED technology. The yellow flashing light is used to warn of hazards (see also § 38 of the German Road Traffic Regulations StVO).

• IPX5 tested for use outdoors
• LED element: 10x 3 W LEDs
• Average current draw: 1.7 A at 12.8 V DC / 0.88 A at 24 V DC
• Max. current draw: 3.3 A at 12.8 V DC / 1.75 A at 24 V DC
• Average output: 21 W
• Max. power: 42 W
• Recommended fuse: 5 A
• Storage temperature: -40 °C to +75 °C
• Operating temperature: -30 °C to +65 °C

Note:

Refer also to §52 of the German Road Traffic Registration Ordinance StVZO for the use of warning beacons on public roads.

The LED lamp is only intended for temporary use. It should only be used on flat, horizontal and standard painted surfaces of a dry and clean vehicle roof (steel). Continuously check the proper adhesion of the magnetic base to the vehicle roof.